Serving the Tyler area  ·  (903) 508-2971  ·  Open Mon-Sun 7am-7pm
📞 (903) 508-2971 Free Quote

Metal Roofing in Whitehouse, TX (75791) · Local Professionals

Tyler Metal Roofing · Fast response in Whitehouse and the Tyler area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+179Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Whitehouse is the kind of town where the pine trees are tall, the lots are wide, and a lot of the homes have that classic East Texas mix of brick, siding, and a roof that has seen a few too many hailstorms. From the older farmhouses off Highway 110 to the newer subdivisions popping up near Whitehouse High School, we know the roofing challenges that come with living in 75791.

Homeowners here call Tyler Metal Roofing because we understand the local weather, the local codes, and the way pine needles and oak limbs can wreak havoc on a shingle roof. We are based just down the road in Tyler, and we have been helping Whitehouse residents protect their homes with metal roofing that stands up to hail, wind, and the East Texas sun.

Metal Roofing in Whitehouse (75791)

Whitehouse sits on the edge of the Piney Woods, and that means two things for your roof: lots of shade and lots of debris. The sandy loam and red clay soil here can shift with heavy rain, and we often see drainage issues that lead to fascia and soffit damage. Many homes in Whitehouse are on generous lots with mature loblolly pines and post oaks, which drop needles and limbs that clog gutters and trap moisture against shingles. Newer subdivisions like those off Paluxy Drive and near Whitehouse Junior High have steeper gables and complex rooflines that require careful flashing and ventilation. Whether you are in a brick ranch built in the 1970s or a new construction with architectural shingles, metal roofing is a smart upgrade for hail and wind resistance.

Our team has worked on everything from farmhouses with metal barns to two-story homes in the newer developments. We know how to handle the tight access in some of the older neighborhoods and the HOA requirements that come with the newer ones. We are fully insured and familiar with the permitting process in Whitehouse and Smith County.

Our services in Whitehouse

How a Job Works in Whitehouse

Step 1: It starts with a call to (903) 508-2971 or a request through our website. We schedule a free on-site assessment at your Whitehouse property, where we inspect your current roof, check for leaks, hail damage, or worn fasteners, and discuss your options. We will give you a written estimate and answer any questions about materials, colors, and timelines.

Step 2: Once you approve the estimate, we pull the necessary permits from the city of Whitehouse or Smith County, coordinate with your HOA if needed, and schedule the work. Our crew arrives on time, protects your landscaping, and installs your new metal roof or completes the repair efficiently. We know that Whitehouse properties often have long driveways or tight side yards, so we plan for material delivery and staging to minimize disruption.

Step 3: After the job is done, we do a thorough cleanup, haul away all old materials, and walk the property with you to make sure you are satisfied. We use a magnet to pick up stray screws and nails, and we do not consider the job finished until your yard is clean and your roof is performing as it should.

Pricing for metal roofing in Whitehouse depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam from $10 per square foot, and metal roof replacement from $9 per square foot. If you are considering a retrofit over existing shingles, that starts at $7 per square foot, but keep in mind that local code limits the number of layers you can have. Repairs start at $450, and leak repairs also start at $450. Screw replacement and re-fastening starts at $750. For a more accurate estimate, call us at (903) 508-2971. We offer free estimates and will give you a clear, no-pressure quote.

I live in one of the older homes near downtown Whitehouse with a steep roof and big pine trees. Is metal roofing a good fit?
Yes, metal roofing is an excellent choice for older homes with steep pitches and tree cover. It sheds pine needles and leaves more easily than shingles, and it resists rot and insect damage. We can match the profile to your home's style, whether it is a classic standing seam or a metal shingle that looks like traditional shingles. We will also check your decking and flashing, which often need attention on older homes.
A storm just rolled through Whitehouse and I think I have wind damage. How quickly can you respond?
We prioritize storm damage calls in Whitehouse and the surrounding area. Call us at (903) 508-2971, and we will schedule an inspection as soon as possible, often within 24 to 48 hours depending on demand. We can tarp active leaks and provide a detailed assessment for your insurance claim. Remember, we document damage but cannot guarantee insurance coverage; that is up to your provider.
What is the typical cost for a metal roof on a 2,000 square foot home in Whitehouse?
For a 2,000 square foot home with a standard pitch, you might be looking at $16,000 to $20,000 for a basic corrugated or ribbed panel roof, and $20,000 to $24,000 for standing seam. These are ballpark figures; the actual price depends on roof complexity, access, and material choice. Call us at (903) 508-2971 for a free estimate tailored to your home.
Do I need a permit for a metal roof replacement in Whitehouse?
Yes, the city of Whitehouse typically requires a permit for a full roof replacement, and Smith County has its own requirements for unincorporated areas. We handle the permitting process for you, ensuring that the work meets local building codes and that inspections are scheduled. Permit fees and timelines vary, so we confirm the specifics with the local building department before starting.
My HOA has design rules. Can you help with approval for a metal roof?
Absolutely. We work with many HOAs in Whitehouse and can provide the necessary documentation, such as color samples and product specifications, to help you get approval. We recommend submitting your request early, as HOA reviews can take time. We will coordinate with your HOA to ensure the installation meets their guidelines.
Are you fully insured for work at my Whitehouse property?
Yes, we are fully insured with general liability and workers' compensation coverage. This protects you and your property in the unlikely event of an accident during the project.
How often should I have my metal roof inspected in Whitehouse?
We recommend an inspection every two to three years, especially after major hailstorms or high winds. Whitehouse's pine trees drop needles that can trap moisture, and summer sun can degrade sealants. A free inspection from our team can catch small issues like loose fasteners or flashing gaps before they become leaks. Call (903) 508-2971 to schedule.
Why choose us?

Trusted professionals in Tyler

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Tyler

All your work handled by qualified professionals in Tyler

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

179+ Verified Client Reviews in Tyler

⭐⭐⭐⭐⭐ 4.9/5 · 179 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Tyler · Response within 24h · No commitment · ☎ (903) 508-2971

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Tyler ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm