Licensed & Insured, in Tyler and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Tyler
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (903) 508-2971 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Tyler and surrounding areas · On-site visits included · Free estimate within 24h
Tyler Metal Roofing is a team of local certified professionals based in Tyler. We respond quickly in Tyler and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (903) 508-2971⭐⭐⭐⭐⭐ 4.9/5 · 179 verified Google reviews
“Had Tyler Metal Roofing out to fix the small shed in my backyard and they treated it like a full house job. Tightened everything down and it's solid as a rock now.”
Metal Roof Repair
“We wanted copper for our brick house and these guys nailed it. The standing seam copper panels look incredible against the brick, and the crew of four finished in about a week with zero mess left behind.”
Copper & Specialty Metal Roofing
“Our old barn roof was rusted through in spots and they put up new red ribbed panels on the whole thing. Fast, fair price, and the hay stays dry now. Only wish they'd given me a couple days' more notice before starting.”
Commercial & Agricultural Metal Roofing
“Standing seam on our brick ranch house and it completely changed the look. Clean lines, no exposed screws, and they walked me through the whole flashing detail around the chimney. Really impressed.”
Standing Seam Metal Roofing
“Had a leak over the lake house every time it rained hard and two other guys couldn't find it. Tyler Metal Roofing tracked it to the flashing around a skylight, fixed it in an afternoon, and we've been dry through two storms since.”
Metal Roof Leak Repair
“Tore off the old shingles and replaced with a new metal roof on our place. Crew was respectful, cleaned up every nail, and finished in three days. Couldn't be happier.”
Metal Roof Replacement
“We went with the retrofit over our existing shingles on the brick house to save some money and I was nervous about it. Shouldn't have been, the install looks factory-clean and you'd never know there's old shingles underneath. Great communication the whole way.”
Metal Roof Over Shingles (Retrofit)
“Full replacement on our brick house after hail beat up the old roof. They handled the insurance paperwork photos for us, which saved me a headache. Solid work, though the dumpster sat in the driveway a day longer than promised.”
Metal Roof ReplacementReal photos of our work in Tyler · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener panel installation | Starting at $8/sq ft | Includes tear-off, synthetic underlayment, flashing and panels on a straightforward single-story roof. |
| Standing seam installation | Starting at $11/sq ft | Concealed fasteners and raised seams; price rises with roof pitch, complexity and panel gauge. |
| Metal shingle or stone-coated steel | Starting at $12/sq ft | Includes stamped or granule-coated panels; steeper roofs and historic profiles move the number up. |
| Complex or large-scale job | On estimate | Multi-story, steep-gable or heavily cut-up roofs need an on-site look before we quote. |
| Travel | Included | In Tyler and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (903) 508-2971, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam installation, basic ranch | Starting at $10/sq ft | Includes tear-off, underlayment, panels, standard flashing and haul-off on a simple roof pitch. |
| Standing seam on steep or cut-up roof | Starting at $13/sq ft | Higher pitch, multiple valleys and dormers add labor, rigging and panel cutting time. |
| Standing seam over existing shingles | Starting at $9/sq ft | Retrofit skips tear-off but requires sound decking and is limited by code on existing layers. |
| Deck repair and flashing rebuild | On estimate | Soft sheathing, rusted chimney flashing or valley damage needs an on-site look before pricing. |
| Travel | Included | In Tyler and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (903) 508-2971, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener panel replacement | Starting at $9/sq ft | Includes tear-off, deck inspection, underlayment, panels, and trim; steep pitch or extra layers raise the rate. |
| Standing seam replacement | Starting at $12/sq ft | Concealed fasteners, raised seams, and full flashing; roof complexity and panel gauge move the price. |
| Metal shingle or stone-coated steel replacement | Starting at $11/sq ft | Textured or stamped panels with impact resistance; dormers, valleys, and historic district trim add labor. |
| Complex or large-scale replacement | On estimate | Steep multi-gable roofs, multiple layers, decking rot, or lake-house access need an on-site look first. |
| Travel | Included | In Tyler and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (903) 508-2971, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener ribbed panel over shingles | Starting at $7/sq ft | Includes underlayment, panels, screws and basic flashing on a sound single-layer roof. |
| Standing seam over shingles | Starting at $11/sq ft | Concealed-fastener panels with premium trim; price moves with pitch and roof complexity. |
| Metal shingle or stone-coated steel over shingles | Starting at $10/sq ft | Textured or interlocking profiles; steeper gables and dormers push the rate higher. |
| Deck repair or soft sheathing replacement | On estimate | Needs an on-site look because rot extent and attic access vary house to house. |
| Travel | Included | in Tyler and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (903) 508-2971, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor leak or flashing repair | Starting at $450 | Covers single-penetration leak diagnosis, sealant, and flashing repair on accessible roof sections. |
| Screw replacement and re-fastening | Starting at $650 | Replaces backed-out or rusted fasteners and reseats closures on exposed-fastener panels. |
| Panel replacement (per panel) | Starting at $550 | Matches profile and color; price climbs with panel count, pitch, and access difficulty. |
| Storm damage repair | On estimate | Requires on-site inspection to document wind or hail damage and scope the repair. |
| Travel | Included | In Tyler and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (903) 508-2971, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single leak diagnosis and spot repair | Starting at $450 | Includes roof inspection, leak tracing, and one localized repair such as a fastener or small flashing fix. |
| Fastener and seam repair | Starting at $650 | Covers replacement of failed screws and washers plus resealing separated seams on a defined roof area. |
| Flashing rebuild at chimney or skylight | Starting at $750 | Includes removal of failed flashing, new metal and counterflashing, and sealing at the penetration. |
| Panel section replacement | On estimate | Rusted or hail-damaged panels need an on-site look to match material, pitch, and access before pricing. |
| Emergency tarping after storm | Starting at $350 | Temporary tarp secured over the leak area, with permanent repair quoted separately after inspection. |
| Travel and estimate | Included and free | No mileage fee in Tyler and surrounding areas, and the estimate carries no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Spot re-fastening | Starting at $750 | Replaces loose and failed screws on the worst slopes, priced by fastener count and roof access. |
| Full re-fastening | Starting at $1,450 | Replaces every screw on the roof with new oversized fasteners and UV-rated washers. |
| Oversized screw retrofit | Starting at $1,850 | Steps up to larger diameter screws where holes are enlarged, with extraction of broken fasteners included. |
| Washer-only replacement | Starting at $950 | Pulls sound screws, installs fresh UV-rated washers, and resets each fastener to correct torque. |
| Complex or large-scale job | On estimate | Steep two-story roofs, barns over 3,000 square feet, and heavy rust need an on-site look first. |
| Estimate | Free | Response within 24h at (903) 508-2971, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof (barn, shed, carport) | Starting at $5.50/sq ft | Includes panels, underlayment and trim; gauge and roof pitch move the price. |
| R-panel roof on a home or shop | Starting at $6.50/sq ft | Includes closures and flashing; valleys, dormers and skylights add labor. |
| 5V crimp panel with historic profile | Starting at $7.00/sq ft | Includes traditional V-rib profile; design review and custom trim add cost. |
| Tear-off and deck repair | Quoted per job | Priced after we inspect sheathing; soft decking near eaves is common. |
| Re-fastening and screw replacement | Starting at $450 | Includes larger washer-head screws and new closures; roof size drives total. |
| Estimate | Free | Response within 24h at (903) 508-2971, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stamped steel shingle roof | Starting at $9/sq ft | Includes tear-off, underlayment, panels and standard flashing on a simple ranch roof. |
| Stone-coated or slate-look shingles | Starting at $12/sq ft | Premium textured profiles cost more, especially on steep gables and historic district homes. |
| Complex or two-story roof | On estimate | Steep pitch, many valleys and landscaping access need an on-site look before pricing. |
| Travel | Included | In Tyler and surrounding Smith County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (903) 508-2971, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel over existing shingles | Starting at $9/sq ft | Includes underlayment and flashing prep where code allows one existing layer. |
| Full tear-off and stone-coated install | Starting at $11/sq ft | Includes strip, disposal, deck inspection, new underlayment and panels. |
| Steep-gable or complex roof | On estimate | Multiple valleys, skylights, and two-story access need an on-site look first. |
| Deck repair or sheathing replacement | Priced per sheet | Soft sheathing found during tear-off is replaced before underlayment goes down. |
| Travel | Included | In Tyler and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (903) 508-2971, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper porch or bay window accent | Starting at $20/sq ft | Hand-formed 20 oz copper pans and soldered seams for porches, bays, and dormers. |
| Copper chimney flashing and cricket | Starting at $1,200 | Formed and soldered flashing tied into brick or stone, includes deck repair at the detail. |
| Zinc or painted aluminum accent roof | Starting at $18/sq ft | Lower-cost specialty metal formed to match the existing profile and color. |
| Full copper architectural roof | On estimate | Full roof scope needs an on-site look at deck condition, access, and historic review requirements. |
| Travel | Included | In Tyler and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (903) 508-2971, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Reflective coating, single-story roof | Starting at $2.50/sq ft | Includes wash, rust spot treatment, and one reflective topcoat on a simple panel roof. |
| Full paint system with color change | Starting at $3.75/sq ft | Base coat plus finish coat in your chosen color, with rust converter on affected areas. |
| Steep or cut-up roof (Hollytree, lake cabins) | On estimate | Steep pitch, multiple planes, and lake access change the safety setup and labor time. |
| Rust treatment and fastener sealing add-on | On estimate | Priced by the number of rusted spots and fasteners that need replacement before coating. |
| Travel | Included | in Tyler and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (903) 508-2971, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single penetration flashing repair | Starting at $600 | Covers one pipe boot, vent collar, or small step flashing section, including sealant and fasteners. |
| Chimney flashing replacement | Starting at $900 | Custom-bent counterflashing and step flashing around the chimney, priced by chimney size and roof pitch. |
| Skylight curb re-flash | Starting at $750 | New curb flashing and sealant line per skylight, with access difficulty as the main cost factor. |
| Chimney cricket rebuild | On estimate | Framing and flashing a new diverter behind the chimney requires an on-site look at the deck and brick. |
| Travel | Included | In Tyler and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (903) 508-2971, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Snow guards over one door or walkway | Starting at $1,200 | Includes a small run of pad or bar guards plus inspection of the slide path above it. |
| Reinforced eave and rake fastening | Starting at $1,450 | Added screws or clips along exposed edges, priced by linear footage and roof height. |
| Wind-uplift clips on steep metal roof | Starting at $1,800 | Concealed clips at seams over entries and patios, priced by panel count and pitch. |
| Complex or large-scale job | On estimate | Multi-slope roofs, lake houses, and steep two-story gables need an on-site look first. |
| Travel | Included | In Tyler and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (903) 508-2971, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof, flashing, and gutter inspection with photo documentation and a written repair-or-replace recommendation. |
| Minor panel and fastener repair | Starting at $350 | Re-fastening backed-out screws and resealing isolated lifted panels on exposed-fastener and standing seam roofs. |
| Flashing and penetration repair | Starting at $650 | Rebuilding chimney, skylight, or valley flashing damaged by wind-driven rain, priced by access and height. |
| Hail dent and coating assessment | On estimate | Stone-coated and metal shingle damage needs an on-site look to judge coating cracks and panel replacement scope. |
| Partial re-roof after major wind | On estimate | Tornado-warned wind damage across a full slope requires measurement and panel matching before pricing. |
| Travel and estimate | Included | Free inspection and estimate across Tyler and nearby areas, no separate call-out fee, response within 24 hours. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard residential inspection | Free estimate | On-roof check of panels, fasteners, seams, and flashing with photo report; roof size and pitch move the price |
| Exposed fastener audit | Starting at $150 | Screw-by-screw check on corrugated and ribbed panels; number of panels and rust severity move the price |
| Hail and storm damage assessment | Starting at $200 | Documented impact marks and dents for insurance; roof size and number of slopes inspected move the price |
| Complex or large-scale job | On estimate | Multiple buildings, steep gables, or many penetrations need an on-site look before a number is given |
| Travel | Included | In Tyler and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (903) 508-2971, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless 5-inch K-style gutter | Starting at $9/linear ft | Includes on-site forming, hidden hangers and standard downspouts; run length and access move the price. |
| Seamless 6-inch high-capacity gutter | Starting at $14/linear ft | Larger trough and heavier hangers for steep gables and big roof planes; two-story access adds labor. |
| Guards, strainers and cleanouts | Starting at $4/linear ft | Micro-mesh or screen guards plus outlet screens; pine and oak load under Tyler canopies drives the choice. |
| Half-round or copper gutter | On estimate | Material and bracket work vary widely; historic profile and color review may apply before ordering. |
| Downspout routing and discharge | Starting at $12/linear ft | Includes extensions and buried discharge lines; crossing walkways or long runs away from the foundation adds cost. |
| Travel | Included | In Tyler and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (903) 508-2971, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Barn or shop roof repair | Free estimate | Covers fastener replacement, flashing and leak diagnosis, with access and building height moving the price. |
| Exposed-fastener panel install | Starting at $3.50 per sq ft | Includes 26 or 29 gauge ribbed panels and gasketed fasteners, with slope and insulation raising the rate. |
| Standing seam on a commercial building | Starting at $7.00 per sq ft | Includes concealed-fastener panels and closures, with building height and roof complexity moving cost. |
| Insulated agricultural system | On estimate | Needs an on-site look at purlins, ventilation and condensation control before a number is given. |
| Travel | Included | In Tyler and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (903) 508-2971, no obligation to book. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Tyler want more than a crew with a truck: they want someone who understands how roofs actually fail here. Tyler Metal Roofing is a network of licensed, bonded, and insured local contractors who install, replace, re-roof, and repair metal roofs across Tyler and the surrounding communities of Whitehouse, Lindale, Bullard, and Chandler. We work on steep-pitch homes, properties under heavy pine and oak canopy, and the large stock of aging screw-down roofs that are now 15 to 30 years old.
That mix matters. Pine needles hold moisture against panels and fill gutters, limbs drop without warning, and the humid heat plus spring hail put fasteners and seams under real stress. Whether you need a full Metal Roof Installation or a straight answer about a leak, we look at the roof in front of us and tell you what it needs, including when the cheaper repair is the right call.
Most metal roof leaks in Tyler trace back to a short list of causes, and each one is predictable. On exposed-fastener roofs, the EPDM sealing washer under each screw dries, shrinks, and cracks with age and sun exposure. Once that washer fails, water follows the fastener shank into the deck. This is the number one issue on 15 to 30 year old screw-down roofs, and it is why Screw Replacement & Re-Fastening is often the highest-value repair we perform. Seams separate as panels expand and contract through hot summers and cool winters. Pipe boots and flashing at chimneys, skylights, and valleys crack or pull loose. Wind lifts and peels panels at edges and ridges, and fallen pine and oak limbs puncture panels outright.
Ignoring a small leak is expensive. Water tracks along purlins and decking, so the stain on your ceiling may sit many feet from the actual entry point. By the time it shows, sheathing can be rotted and insulation soaked. Our Metal Roof Leak Repair service starts with finding the true source, not sealing over the symptom.
The honest call between repair and replacement depends on panel condition, fastener age, and how much of the roof is affected. When panels are sound and the problem is fasteners and flashing, a full screw replacement with new sealing washers often restores a watertight roof for a fraction of replacement cost. When panels are rusted through or seams are failing across the field, we say so plainly. Call (903) 508-2971 or request a free estimate and we will tell you which category your roof falls into.
We install the full range of metal systems, and matching the system to the home matters more than any single brand. Standing Seam Metal Roofing uses concealed clips and raised seams with no exposed fasteners, which makes it the premium choice for primary residences. Corrugated & Ribbed Panel Roofing is the economical workhorse for cabins, barns, shops, and porches. We also install Metal Shingle Roofing, Stone-Coated Steel Roofing, and Copper & Specialty Metal Roofing for accents and historic profiles.
The tradeoff is simple and worth stating directly: standing seam costs more up front but has no exposed screws to service over its life, while screw-down costs less and needs its fasteners checked and replaced periodically. When the deck is sound, Metal Roof Over Shingles (Retrofit) is a legitimate option that saves on tear-off and disposal. When the deck is soft or layered past what code allows, tear-off is the right path, and we will tell you which one your roof supports.
Metal roof pricing in Tyler is quoted per square foot for installations and often as flat-rate pricing for repairs. The variables that move the number are consistent: panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access around the home. Because those factors vary so much from roof to roof, we frame everything as typical ranges rather than fixed figures. Final pricing depends on the roof and site conditions, and we confirm it after an on-site look.
Some carriers may offer premium discounts for metal or impact-rated roofs, though that is between you and your insurer and is never a promise. For a clearer picture of how systems compare, see our pricing page, then request a free estimate or free roof inspection so we can give you real numbers for your home.
After a hail or wind event, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent. Coverage decisions rest with your carrier, and we make no promise that a claim will be approved. Our role is accurate documentation and honest repair or replacement guidance, nothing more.
On permits: in most jurisdictions, a permit is commonly required for a full replacement or re-roof, but requirements, fees, and inspection requirements vary by city, and recover over existing shingles is limited by code to a set number of existing layers. Historic district or HOA design review can also restrict panel profile and color, which is common in Tyler's historic neighborhoods. We handle permitting as part of the project and keep you informed, but we do not give legal or code advice. Requirements vary, always verify with the Tyler building or planning department before starting your project. To schedule an inspection or ask a question, contact us.
Ready to get started? Tyler Metal Roofing serves in Tyler and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Tyler · Response within 24h · No commitment · ☎ (903) 508-2971
Your Free Quote Request