Serving the Tyler area  ·  (903) 508-2971  ·  Open Mon-Sun 7am-7pm
📞 (903) 508-2971 Free Quote

Metal Roofing in Lindale, TX (75771) · Local Professionals

Tyler Metal Roofing · Fast response in Lindale and the Tyler area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+179Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Lindale is where the Piney Woods meets ranch country, and the roofs here have to handle both. From the brick homes off Highway 69 near the old downtown to the acreage properties with metal barns and shops along FM 16, the housing stock is a mix of older farmhouses and newer builds that need roofing that can stand up to East Texas weather.

Homeowners in Lindale (75771) call Tyler Metal Roofing because we know the specific challenges of roofing here: pine needles piling up in valleys, hail that dents shingles, and the straight-line winds that come with spring thunderstorms. We are based in Tyler and serve Lindale and the surrounding area, and we have worked on everything from historic homes to agricultural buildings. When you need a roof that lasts, call us at (903) 508-2971.

Metal Roofing in Lindale (75771)

Lindale sits in the rolling sandy loam and red clay of Smith County, and the lots here are often larger than what you find in Tyler proper. Many properties have mature loblolly pines and post oaks that drop needles and limbs on roofs, which can trap moisture and cause fasteners to fail. The terrain is gently rolling, so drainage matters, and we often see gutters clogged with pine straw. For ranch homes and acreage with metal barns, we recommend standing seam or corrugated panels that can handle the span and the wind exposure. For the newer subdivision homes off Highway 69 and near Lindale High School, stone-coated steel or metal shingles give a traditional look with better hail resistance.

Our team has been serving Lindale and the Tyler area for years, and we understand the local building department requirements and the importance of proper flashing around chimneys and skylights. We also work with property managers and agricultural clients who need durable roofing for shops and barns. Whether it is a repair after a storm or a full replacement, we bring the same attention to detail.

Our services in Lindale

How a Job Works in Lindale

Step 1: You call us at (903) 508-2971 or request a free estimate online. We schedule a time to come out to your Lindale property, inspect the roof, and discuss your options. We will check for leaks, hail damage, and any issues with fasteners or flashing. You get a written estimate with clear pricing.

Step 2: Once you approve, we order materials and schedule the work. In Lindale, some properties have tight access or long driveways, so we plan for delivery and staging. If your home is in an HOA or historic district, we help with the paperwork. We pull the required permits from the city or county and coordinate inspections. Our crew is trained to work safely and efficiently, and we keep you informed on progress.

Step 3: After the roof is installed, we clean up the site completely, including magnet sweeps for nails. We do a final walkthrough with you to make sure you are satisfied. We also provide warranty information and maintenance tips. Your property is left clean and your new roof is ready to protect your home.

Pricing for metal roofing in Lindale depends on the size and complexity of your roof, the material you choose, and the condition of the existing roof. For a typical ranch home, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof over shingles (retrofit) at $7 per square foot. Repairs start at $450, and screw replacement or re-fastening starts at $750. For agricultural buildings, we provide free estimates. We are happy to give you a detailed quote after an on-site assessment. Call (903) 508-2971 to schedule your free estimate.

My Lindale ranch home has a lot of pine trees, and I am constantly cleaning needles off the roof. Will a metal roof help with that?
Yes, metal roofs are much easier to clean than shingles, and they do not trap needles the same way. However, you still need to keep valleys and gutters clear. We can install gutter guards or recommend a maintenance plan to reduce buildup. For heavily wooded lots, standing seam is a good choice because it has fewer fasteners where debris can catch.
We had a bad hailstorm in Lindale last spring. How quickly can you inspect my roof for damage and make repairs?
We offer free storm damage inspections and can usually get to Lindale within a few days after a storm. If there is an active leak, we prioritize emergency repairs. Call us at (903) 508-2971 to schedule. We document any damage for insurance claims, but we never promise coverage, as that is up to your insurer.
What is the typical cost to replace a metal roof on a 2,000 square foot home in Lindale?
For a 2,000 square foot home, a basic corrugated panel roof might start around $5.50 per square foot, while standing seam could be $10 per square foot or more. The total depends on roof pitch, accessibility, and whether you need to remove the old roof. We provide free estimates so you can get an accurate number.
Do I need a permit from the City of Lindale to replace my roof?
Yes, the City of Lindale typically requires a permit for roof replacements. The requirements and fees vary, so we always check with the local building department before starting work. We handle the permit application and inspections as part of our service.
My neighbor and I share a property line, and I want to make sure my new metal roof does not cause drainage issues on their side. What should I do?
We can adjust gutter placement and downspouts to direct water away from the property line. If you are in an HOA, we can help you get approval for the roof style and color. It is also a good idea to talk with your neighbor before installation to avoid misunderstandings.
Are you fully insured for roofing work in Lindale?
Yes, Tyler Metal Roofing is fully insured with general liability and workers' compensation coverage.
How often should I have my metal roof inspected in Lindale?
We recommend an inspection every two to three years, especially after major storms. Pine needles and debris can hide issues like loose fasteners or sealant failure. A quick inspection can catch small problems before they become leaks. We offer free estimates for inspections.
Why choose us?

Trusted professionals in Tyler

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Tyler

All your work handled by qualified professionals in Tyler

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

179+ Verified Client Reviews in Tyler

⭐⭐⭐⭐⭐ 4.9/5 · 179 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Tyler · Response within 24h · No commitment · ☎ (903) 508-2971

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Tyler ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm