Serving the Tyler area  ·  (903) 508-2971  ·  Open Mon-Sun 7am-7pm
📞 (903) 508-2971 Free Quote

Metal Roofing in Gladewater, TX (75647) · Local Professionals

Tyler Metal Roofing · Fast response in Gladewater and the Tyler area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+179Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Gladewater is a small East Texas town where the antique district and the lake cottages around Lake Gladewater share the same humid, piney air. The housing stock runs from early 1900s cottages and brick storefronts near the old downtown to mid-century ranches and newer cabins tucked into the trees, and the lots are often tight, sandy, and shaded by loblolly pines. If your roof is showing its age, we can help.

Homeowners in the 75647 ZIP code call Tyler Metal Roofing because we know how Gladewater's mix of historic buildings and lakeside retreats holds up to heat, hail, and pine limbs. We are based in Tyler and serve Gladewater and the surrounding area, and we treat every property like it is in our own neighborhood.

Metal Roofing in Gladewater (75647)

Gladewater sits in the Piney Woods on rolling sandy loam and red clay, and that ground moves with the seasons. The antique district downtown has older buildings with steep, narrow lots where access is tight and flashing details around chimneys and parapets matter more than panel color. Around Lake Gladewater, cottages and cabins deal with constant shade, pine needles that trap moisture, and gutters that clog fast. On the newer side, subdivision homes and farm shops out toward the highways need roofs that can handle spring hail and straight-line winds without constant screw-back maintenance. We see a lot of failed fasteners, separated seams, and flashing gaps on older roofs here, plus wind-lifted panels after summer storms. Our team has worked in Gladewater and across Smith and Gregg counties long enough to know which profiles and colors fit the local look, and which details keep water out of places it should never get into.

We bring fully insured crews (general liability and workers' compensation) and a straightforward approach: inspect, explain, and fix what actually needs fixing. Whether it is a standing seam roof on a lake cabin or a repair on a downtown building, we handle the permit questions and the details so you do not have to chase them.

Our services in Gladewater

How a Job Works in Gladewater

Step 1: You call us at (903) 508-2971 or request a free estimate online. We schedule an on-site assessment at your Gladewater property, walk the roof and the attic if needed, and take photos so we can show you exactly what we see. You get a written scope and a clear price before any work starts.

Step 2: Once you approve, we pull the required roofing permit with the local building department and schedule the work. In Gladewater, that might mean coordinating with a historic district review for a downtown building or planning around tight alley access near the antique shops. We stage materials carefully, protect landscaping, and keep the site secure each day.

Step 3: When the job is done, we clean up completely, haul away old materials, and walk the property with you. We check gutters, flashing, and fasteners, and we do not leave until you are satisfied with the result.

Pricing in Gladewater depends on the roof size, pitch, access, and condition, but here are realistic starting points from our current service list. Metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and roof-over-shingles retrofit at $7. Repairs and leak repairs start at $450, screw replacement and re-fastening at $750, and flashing, chimney, or skylight repair at $600. Coating and painting starts at $2.50 per square foot, and gutters for metal roofs start at $9 per linear foot. For a typical Gladewater cottage or ranch, most full installations land in the low-to-mid five figures depending on the profile and trim. Call (903) 508-2971 for a free estimate tailored to your property.

My lake cottage near Lake Gladewater has pine needles packed in the valleys and the roof is leaking. What should I do?
Pine needles and leaf litter trap moisture and break down the protective coating on metal roofs, which is a common cause of leaks on lake properties here. We start with a free inspection to find the source, clear the debris, and check fasteners and flashing. If the panels are still sound, a targeted repair and a good cleaning may be all you need. If the metal is failing, we can quote a replacement or a coating.
A storm just blew through Gladewater and lifted some panels on my roof. Can you come out fast?
Yes. Storm and wind damage repair is one of our core services, and we offer free inspections for storm damage. Call (903) 508-2971 and we will schedule a prompt visit, document the damage for your insurance claim if needed, and make temporary or permanent repairs so your home is protected. We never promise insurance coverage, but we do provide the photos and paperwork your adjuster will want.
What does a metal roof cost for a typical Gladewater home?
For a standard ranch or cottage in the 75647 area, metal roof installation typically starts around $8 per square foot, with standing seam at $10 and roof-over-shingles at $7. Repairs start at $450. The final price depends on square footage, roof pitch, how many layers are coming off, access, and whether any decking needs repair. We give you a written estimate after a free on-site assessment.
Do I need a permit to replace my roof in Gladewater, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof in Gladewater, and the rules and fees are set by the local building department. We verify the current requirements with the city before we start and pull the permit as part of the job. If your property is in a historic district or has HOA design rules, we also help coordinate the review so your panel profile and color are approved before materials are ordered.
My neighbor and I disagree about where the property line is, and my new roof overhangs slightly. How do you handle that?
Property line disputes are a civil matter, so we do not determine boundaries, but we do plan the work to stay within the footprint of your existing roof and gutters. If there is an HOA, we coordinate approval for the panel style and color. If a shared structure or fence line is involved, we recommend getting a survey or written agreement with your neighbor before work begins so there are no surprises.
Are you insured for work on my Gladewater property?
Yes. Tyler Metal Roofing is fully insured with general liability and workers' compensation coverage.
What maintenance should I do on a metal roof in Gladewater between seasons?
Keep pine needles and leaves off the roof and out of the gutters, especially if you are under tall pines or near the lake. Twice a year, check for loose fasteners, lifted panels, and gaps around chimneys and skylights. After a hail or wind event, have the roof inspected. A simple annual inspection and cleaning goes a long way here because our humid summers and spring storms are hard on roofs.
Why choose us?

Trusted professionals in Tyler

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Tyler

All your work handled by qualified professionals in Tyler

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

179+ Verified Client Reviews in Tyler

⭐⭐⭐⭐⭐ 4.9/5 · 179 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Tyler · Response within 24h · No commitment · ☎ (903) 508-2971

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Tyler ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm